Polypropylene outdoor seat/chair

1.safety stadium seat
2.Master Batch with UV resistant additive and Flame retardant
3.not easy broken .high quality
Blow molded stadium seat
-
Material:
High Impact Polypropylene (Copolymer and homo polymer -- PP)
-
Type:
Shell type
-
Use:
Out door stadium seat
-
Cap:
Caps to close fixing screw holes
-
Placing:
Perfect seating to the concrete without oscillation or shaking to any sides.
-
Accessories:
Suitable accessories for fixing, like Screws/Bolts, Fisher etc to be provided.
-
Sample:
Sample to be provided, Air cargo worthy packed.
- At the edge of the front side there is grip to concrete and support in both sides.
- Thickness of the seats at the edge is 5cm and increasing to the center as you can
-
Packing:
A 20’ container can load about 2500Nos.
Master Batch with UV resistant additive and Flame retardant. Hole for water drain. Mechanical durability. Material that allow deformation and elongation. Impact resistant (Not breakable by use). Weather resistance (rain, son, mold, abrasion. color fading resistance.

Installation:
To be attached to concrete with bolts by (2) two holes. The bolts must have a Diameter of 3/8 x 2” and come with their respective Expansive anchors ; Nuts and washers with O-rings and Cap covers capable to seal to avoid rusting and water intrusion to the bolts and anchors. The three holes (fixation points) non-lineal will guarantee stability and wear of the concrete base

Size:
Seating:
Inside measurements
width: 43cm
Length (to back): 44cm

Back Rest:
Inside measurements
Width: 42cm (Down part)
Height: 40 cm to 45cm